High Rise Second Place Winner for the Premiere on Pine

The residential tower, Premiere on Pine (formerly known as 815 Pine) is a Second Place Winner of the American Concrete Institute’s 2017 Excellence in Concrete Construction Awards in the High Rise category. This is quite an honor as there were only 12 winners from around the world. The winners were recognized at the “Celebrating Concrete Innovation and Excellence Across the Globe” Awards Gala during the ACI Concrete Convention and Exposition. Recipients of the award for the Premiere on Pine’s project include its owner and developer, Holland Partner Group; architect, Weber Thompson Architects; engineering firm, Cary Kopcznyski & Company; general contractor, Holland construction Inc.; and concrete contractor, The Conco Companies.

815 Pine St, Seattle, WA — Premiere on Pine (formerly known as 815 Pine), won second place of the American Concrete Institute’s 2017 Excellence in Concrete Construction Awards in the High Rise category.

The tower’s use of high-strength concrete and reinforcing steel created maximum floor space for the small site and is the first building in Seattle to have a specified concrete strength of 15,000 psi in its columns. Along with showcasing the technological advancements in the concrete industry over the last couple of decades, it allowed the high-strength columns to be smaller than those found in similarly sized projects. Conco is extremely honored to receive the award from the ACI. We are proud to have been selected for this innovative project and to have been a part of this exceptional team.

2017 ACI Excellence Awards - The Conco Companies

2017 ACI Excellence Awards - The Conco Companies -2

2017 ACI Excellence Awards - The Conco Companies - 1

14th_Glisan_Image-from-NextPortland-Conco-Companies.jpg

Rendering of 14th & Glisan. Image source: NextPortland.com

The Conco Companies is providing a full range of concrete services for a new 16-story, mixed-use building project that is just getting underway in Portland, OR. The 14 & Glisan high-rise will be comprised of 230 residential units and approximately 4,285 square feet of ground floor retail space. The materials proposed for the tower’s exterior includes pre-cast concrete panel, brick veneer, aluminum storefront glazing and a unitized window wall system. The project also includes three levels of below grade parking to accommodate 201 vehicles.

The project is being developed by the Holland Partner Group and Holland Construction is serving as the General Contractor. The firm of Ankrom Moisan is the architect and the structural engineer is CKC Structural Engineers. The project is expected to be completed by late 2018.

Conco will shortly begin work on the building and will provide concrete pumping, reinforcement, formwork, shotcrete, and finishing. We expect our part of the job to take approximately 10 months during which we will place 16,000 cubic yards of concrete. Along with providing extensive concrete services for the 14 & Glisan tower, we also recently started on another high-rise, the Modera Glisan, directly across the street that is being developed by the Mill Creek Resident Trust Company.

Since the 14 & Glisan tower is located near a historic district, the side of the building facing the older architecture steps down in height so as not to dwarf the lower buildings. The architects explain that “the concept of the building is derived from the character of the surrounding district,” and evokes both the simplicity and mass of the buildings adjacent to the site. The more modern looking glassy top complements much of the rest of the Portland skyline that is comprised of newer, modern-looking towers.

At The Conco Companies, we are one of the leading concrete contractors in the Western U.S. and offer a wide range of quality services and products. Our experience includes providing services for commercial, educational, parking and other construction development as well as public works projects. We serve California, Washington State, Oregon, Colorado and Nevada.

Village at Totem Lake Rendering, image source: CenterCal Properties, LLC

The Conco Companies is providing a full range of concrete services on “Building C,” a part of the Village at Totem Lake redevelopment project in Kirkland, WA. The development company is CenterCal Properties LLC, who describes the project as “a lifestyle center with a village feel.” The General Contractor is Venture GC, the architect is GBD Architects and the structural engineer is DCI Engineers. Building C, a turnkey concrete package, is Phase II of the project: a 265,000 square foot building that will offer street-level retail and restaurant space as well as upper-level residential units.

Conco’s job responsibilities include providing concrete pumping, reinforcement, formwork, and finishing services along with professional construction hauling services. We started work this August and expect to be finished in about 10 months. One particular challenge of the project is that the construction site is right next to an active shopping mall. Therefore, we are carefully planning before we bring in the multiple placing booms the job requires.

The redevelopment project is a welcomed improvement to the area as the original Totem Lake Mall, built in 1973, was outdated and in varying states of neglect and vacancies. In fact, a Puget Sound Business Journal article from 2015 noted that the original Totem Lake Mall could be considered “the most tired-looking big property in Kirkland.”

The Village at Totem Lake development is expected to be finished by the end of 2018 or the beginning of 2019 and will include a park, retail shops, restaurants, 850 high-end apartments, and a state-of-the-art luxury movie theater. The mall already has commitments from two tenants, Whole Foods and Trader Joe’s, both of which are located in Phase I and are scheduled to open in the fall of 2017.

The Conco Companies are a leading supplier of concrete services for the Western U.S. We got our start in the Bay Area in 1959 by offering clients the best value on a wide range of concrete services and products. Since that time, we have taken a leading role as one of the top concrete contractors in the region. We have four regional offices serving California, Nevada, Washington, Oregon and Colorado.

Tacoma-Convention-Center-Hotel-Rendering-Conco-Companies.jpg

Tacoma Convention Center Hotel Rendering, image source: tacomaconventioncenter.org

The Conco Companies will begin work on the new Tacoma Convention Center Hotel in August and we expect our part of the project to take approximately 17 months to complete. The $20 million mixed-use high-rise is located on a Tacoma City-owned site that adjoins the Greater Tacoma Trade and Convention Center and will include condominium and retail space in addition to a 300-room Marriott Hotel. The development company is Yareton Investment & Management LLC and the General Contractor is Absher. Ankrom Moisan Architects, Inc. is the architect and the structural engineer is PCS Structural Solutions.

Conco’s range of services will include concrete pumping, reinforcement, formwork, shotcrete, and finishing. Since the new hotel connects to the existing Convention Center and is an active site, one of our challenges involves safely and efficiently setting up the several placing booms that are required for the job. Our crew will also use a self-climbing core form system provided by FCI that allows us to increase productivity and meet tight timelines.

As the project will be the largest one in the city, Conco was selected for the job due to our extensive portfolio and experience with very large projects as well as our ability to handle an aggressive schedule. Moreover one of our first projects in the Northwest was for the Tacoma Marriott Hotel in 2004, which is located across the street from the new job site.

Designed to enhance the conference amenities currently available in the city, the new Convention Center Hotel includes a 10,000 sq. ft. grand ballroom as well as 9,000 sq. ft. of other function rooms within the hotel. A grand promenade will connect the new building to the Tacoma Convention Center and offers regional views of the area including Mt. Rainer. Scheduled to open in the summer of 2019, the tower will be the second tallest building in the city.

At The Conco Companies, we are one of the leading concrete contractors in the Western U.S. and offer a wide range of quality services and products. Our experience includes providing services for commercial, educational, parking and other construction development as well as public works projects. We serve California, Washington, Oregon, Colorado, and Nevada.

Update on 970 Denny

The Conco Companies is providing a wide range of concrete services for 970 Denny, a 40-story apartment building currently under construction in the South Lake Union neighborhood in Seattle, Washington. To date, we recently completed placing the Level 20 deck.

As of June 16, 2017, core and columns are being placed concurrent with deck (i.e., levels 19-20). We are operating on a five-day deck cycle, with 11 consecutive five-day cycles completed. We anticipate completing Level 40 by mid-November, R1 by Thanksgiving and topping out at R4 the first week of January 2018. Total concrete placed to date is just over 24K.

Along with placing each deck floor, we are concurrently constructing the core and columns with 386 steel fiber-reinforced concrete (SFRC) coupling beams to ensure the utmost safety in the quake-prone area. Our crew is busy executing five-day deck cycles and has already completed 11 consecutive cycles. Maintaining this schedule, we anticipate we will complete Level 40 by mid-November, R1 by Thanksgiving, and topping out the project at R4 by the first week in January, 2018.

The project is being developed by the Holland Partner Group and the general contractor is Holland Construction. The architect, Weber Thompson, describes the mixed-use project as a juxtaposing of a “modern, sleek and sculpted 440’ tall tower with a crisp podium structure that is carefully proportioned to blend with nearby industrial age warehouse structures.” Scheduled for completion by the summer of 2018, the building expects to receive LEED Silver certification.

Update on Southport on Lake Washington

Another project Conco has been working on in nearby Renton, WA is the Southport on Lake Washington parking structure. This is our biggest Northwest project to date and we have already placed more than 40,000 cubic yards of concrete, which is just a little over half of the total amount of concrete we will use to complete the project.

We have placed over 40,000cy of concrete, and are just over 50% complete with total yardage poured on this project. To help reduce noise pollution in a residential area, we are using the Putzmeister 14000E high pressure trailer pump.

Furthermore, as the project is in the middle of a residential neighborhood, Conco is using our Putzmeister 14000E high pressure electric pump station to help reduce noise pollution. We are also using the efficient, lightweight Titan #6 pole shores for the high-bay decks. This is only the second project in the Northwest area that has used the Titan system for high shoring conditions. The structure’s design also includes 24-foot tall, single lift, round architectural columns.

We are proud to report that the Southport jobsite has been recognized by both the project owners and the GC for exceptional cleanliness and organization. Conco is also pleased to report that we have implemented our “top down and bottom up” innovative safety procedures that have resulted in a 6-month, injury-free 2017.