Concrete Reinforcement Archives | Page 13 of 26

The Conco Companies is providing a full range of concrete services on the 221 N. Mathilda Project for the San Francisco based owner/developer Spear Street Capital. The three-story, Class A office building also has a partial below grade parking structure with parking stalls. The project is on a 4.3 acre greenfield site located between N. Market Ave and Sobrante Way just off W. California Ave and close to the Sunnyvale Caltrain station, the San Francisco Peninsula commuter rail service. The building’s architect, SmithGroupJJR says the most significant design feature is the “striking, custom 2,000 sq. ft., laminated glass artwork that will span the building’s east façade.”

Conco’s responsibilities on the project include providing concrete pumping, reinforcement, formwork, finishing, and shotcrete services. During the project, we expect to place 7,600 cubic yards of concrete as well as shotcrete. This project consists of 1,150,000 pounds of rebar and post tension reinforcement of which Conco is having placed by others due to factors beyond our control. We started the project in August 2017 will complete the job in July 2018.

Read more about 221 N. Mathilda

The Conco Companies is providing a full range of concrete services on Phase II of the Santa Clara Square Project (Buildings 3-5) for the Newport Beach based owner/developer, the Irvine Company. The entire project consists of 1,763 residential units within 7 separate, 5-story buildings, all wrapped with concrete garage structures and a central promenade that includes approximately 40,000 square feet of ground-floor retail.

Conco was awarded Phase II of the project which is 3 of the 7 buildings (861 of the residential units) and wrapped parking structures for a total of 642,886 sq. ft. The Santa Square Buildings are located between Scott Blvd & Augustine Drive from Octavius Drive to Main Street in Santa Clara, CA.

Conco’s responsibilities on this project include providing concrete pumping, reinforcement, formwork, finishing, and shotcrete services. For the project, we expect to place 22,700 cubic yards of concrete as well as shotcrete. We are also providing 3,100,000 pounds of rebar and post tension reinforcement. Conco crews began work on the project in October 2017 and we will finish up our end of the project in August 2018. The complex expects to receive LEED Gold certification for its environmental sustainability.

Stanford-Redwood-City-A3-Building-The-Conco-Companies-g.jpg

The Conco Companies is providing a full range of concrete services on the Stanford Redwood City A3 Building Project for the Palo Alto based owner/developer, Stanford University Land, Buildings, & Real Estate. The 2-story concrete and steel fitness center is a part of the Stanford Redwood City campus. Located on 35-acres, the Redwood City campus is located between Broadway and Bay Road with the A3 building backing up to Second Ave. In addition, we have been providing concrete services for the Stanford Redwood City Parking Garage Project that is located in the same area.

Conco’s responsibilities on the project include providing concrete pumping, reinforcement, formwork, finishing, and shotcrete services. For the project, we placed approximately 2,800 cubic yards of concrete as well as shotcrete. We also provided 330,000 pounds of rebar and post tension reinforcement. Conco’s crews began work on the fitness center in May of 2016 and completed work in October of 2017.

Read more about Stanford Redwood City A3 Building

The Conco Companies is providing a full range of concrete services on the Modera at San Pedro project located within downtown San Jose’s historic San Pedro Square for the San Mateo based owner/developer, Mill Creek Advisors. The mixed-use development features 201 studio, 1- and 2-bedroom luxury, residential apartment homes and 12,000 sq. ft. of commercial and retail space. In addition, the 8-story structure also has two below grade levels and an integrated four-story parking garage to accommodate 278 vehicles. The project is located between Almaden Avenue and San Pedro Street, north of Santa Clara Street.

Conco’s responsibilities on the project include providing concrete pumping, reinforcement, formwork, finishing, and shotcrete services. During the project we expect to place 12,500 cubic yards of concrete as well as shotcrete and will provide approximately 625,000 pounds of rebar and post tension reinforcement (due to circumstances another company placed the reinforcement). We began work on the Modera at San Pedro in July 2017 and finished our end of the project in February 2018.